CANBUS: MORIMOTO STANDALONE 2.0
CANBUS: MORIMOTO STANDALONE 2.0
Get it between -
PRODUCT DETAILS
PERFECT: The Morimoto Standalone wiring harnesses are the perfect solution for a headlight upgrade on vehicles with finicky headlight systems. Say goodbye to "bulb out" warning lamps and flickering caused by "can-bus" systems.
EFFECTIVE: Each canbus headlight harness has a built-in resistor pack to mimic the characteristics of a standard halogen bulb being plugged in to your stock harness, tricking the car into thinking nothing has changed. Check out this video showing just how simple these are to setup.
POWERFUL: The Morimoto Standalone wiring harness also features Japanese-made Rubycon 6800uF capacitors to help jump-start the ballasts and keep them running smoothly - using the power directly from the vehicle's factory headlight circuit.
EURO-CENTRIC: Morimoto clearly developed specifically with the VW and Euro market in mind, these are known to work well on cars like the newer VW MK5 Golfs, Jettas, BMW E46, etc. The Standalone wiring harnesses DO NOT however work well on domestic cars/trucks like Chrysler/Dodge/Jeep. You guys need Morimoto's "Mopar Spec" Stuff!
SIMPLE: With fewer connections to make compared to something like a full relay wire harness; even your mom could set this thing up it's that easy. Input here, output there...done.
SOLD AS A PAIR: The standalone canbus headlight harnesses come as a pair, one for each side of the car. They are meant to be used as a substitute for a full relay harness, not in addition to one.
NOTE: Note that these will NOT work with vehicles that have DRL's (Daytime Running Lamps) on their low beam circuit due to the pulsed low voltage current. For vehicles with DRLs on the high beam bulb, no problem.
TRUSTED: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us
PRODUCT SPECS
-
WHAT'S INCLUDED
-
HARNESSES: 2x (One Pair) Standalone Canbus Harnesses
-
INPUT ADAPTERS: Your Preference
-
COMPATIBILITY
-
CANBUS SYSTEM: Most European and American vehicles (VW, Audi, Benz, Jeep, Dodge)
-
INCOMPATIBLE: Vehicles with DRL on low beam (with pulsing current)
-
ORIGINAL BULB SIZE: All sizes available
-
HID SYSTEMS: 35w or 55w
-
BI-XENON PROJECTORS?: You'll need High Beam Splitters
-
TECH SPECS
-
INPUT: Your Preference
-
OUTPUT: 9006 Female
-
HIGH BEAM: Molex 2-Pin Female (Bi-Xenon Models Only)
-
MATERIAL: Painted Aluminum Case w/ Hard Epoxy Potting